Product introduction
The consumable is the user's existing steel wire, which is more accurate and reproducible than the image detection.
No compressed air, no noise during operation, improve operator experience. The desktop is small and the operator can inspect more machines.
Abundant mode: one pass and one stop, two pass and two stop, first pass then stop, first stop then pass, four pass. Double hopper, double goods box. Two types of ferrule can be sorted on the same machine.
No metal contact prevents metal pollution; No vibrating hopper is used to prevent mechanical damage.
The weight measurement is qualified. Compared to the spring, pressure sensor, it is easier for batch debugging, more adaptable to requirements of ferrules with different specifications.
All of the important electrical components are selected from industrial automation products widely used in the world, which greatly extends the average time of equipment with no failure.
Users can buy spare parts by themselves, without exclusive product supply restrictions.
Performance parameters
Models |
WKID-SC |
suitable for use in clean plant |
WKID-LC |
suitable for use in clean plant |
|
WKID-SC-A |
suitable for use in common plant |
|
WKID-LC-A |
suitable for use in common plant |
|
Performance |
Efficiency |
1000~3000 piece/ hour(depending on parameter setting) |
Interval of pin change |
>1 hour |
|
Pin change time |
<1 minute |
|
False detection rate of good products |
<1/10000 |
|
Rated voltage |
220VAC |
|
Rated power |
700W |
|
Overall dimensions |
600W*600D*780H(mm) |
|
|
Equipment weight |
90kg |